1x pair

Description: Details iShopping.pk brings you the best price for Bosch CCS-CU Control Unit For CCS 900 Ultro Conference System with express shipping all over Pakistan.   The Bosch CCS-CU Control Unit is the central power and control station for all CCS 900 Ultro Conference System contributor units, such as the chairman and delegate units. The control unit will supply power for up to 50 delegate / chairman units, and provide control for up to 150. The unit features a built in speaker and automated, programmable control over contributor units without the need for an operator. Its Digital Acoustic Feedback Suppression (DAFS) eliminates feedback howling and maintains clear, intelligible speech. Plenty of connections allow for interfacing within paging systems, amplifier systems, recording devices and more. The unit is feature rich, however its control section is straightforward and intuitive to operate in any conference setting.   Features: Discussion Control Without Operator The CU can be setup to operate standalone without the need for an operator. The following 5 modes can be chosen using a rotary control on the unit's top panel: • Open mode - allows selection of one to four microphones (excluded chairmen microphones) which can be simultaneously active • Open mode with auto-switch-off - allows selection of one to four microphones (excluded chairmen microphones) which can be simultaneously active. If the delegate does not speak for 30 seconds, microphones are automatically switched off • Override mode - delegates can override each other simply by activating their microphones. Only one microphone can be active at any one time. (Note: In override mode, delegates cannot override chairmen) • Chairman only mode - only chairmen can speak. Delegate microphones cannot be activated, even when a chairman is not speaking • Test mode - checks if system connections are correct. All microphone light rings and contribution unit LEDs light up to indicate that units are properly connected Supplies Power for up to 50 Contribution Units The CU has two trunk outputs for the loop-through connection of contribution units. It is possible to connect 25 contribution units to each trunk output, with a maximum system cable length of 109.3 yards (100m). Provides Control for up to 150 Contribution Units Up to 3 CUs can be used together in a discussion system to power and control a maximum of 150 contribution units. In this configuration a single CU acts as a master controller for the entire system. Built-in Monitor Loudspeaker The built-in monitor loudspeaker and headphone socket allow the conference to be monitored. Interfaces the System With External Equipment The following equipment can be interfaced to the CCS Ultro Discussion System through the CU: • External wired or wireless microphone - for guest speakers or audience participation. (Note: The external microphone is muted when the priority button on a chairman unit is pressed, and when the system is operating in 'chairman only' mode) • External PA system - for transmitting the proceedings to an audience in the same room or an adjacent room• Tape recorder - for external recording and playing back meetings and discussions • Audio equipment - for providing background music • Telephone coupler - to allow a remote delegate to participate via telephone• External audio processing - an insertion connector is provided Controls and Indicators (Top) • Mains on/off switch • Graphical display for status information (CCS‐CURD) • 5 soft buttons for configuration and control of thebuilt-in MP3 recorder (CCS‐CURD) • Loudspeaker volume control, for setting output level of loudspeakers of contribution units. This control also determines the maximum level for the headphone outputs of the contribution units and the CU. • Microphone mode rotary switch, for setting the number of simultaneously active microphones, and selecting one of the four operation modes (plus test mode) • Power on LED Controls and Indicators (Back) • On/off switch for digital acoustic feedback suppression facility (CCS‐CUD, CCS‐CURD)• Microphone input gain adjustment • External recorder input gain adjustment• Insertion connector bypass switch   Specifications: Connections Top • 1x 0.14" (3.5mm) stereo headphone socket Back • 1x AC input • 2x 7-pole circular female connectors, trunk in/out loop through interconnection  • 1x 3-pole female XLR connector, microphone input (can be used as line input by included 50dB attenuator) • 1 x Cinch connector pair, line input/output  • 1 x Cinch connector pair, telephone input/output • 1 x Cinch connector pair, insertion input/output  • 2 x Cinch connector pairs (R/L channel), external recorder input/output • USB interface (CCS-CURD) Power Supply Mains voltage: 100 to 240 VAC ± 10% Current consumption: maximum 0.9A (100 VAC) to 0.3 A (240 VAC) DC supply to contribution units: 24V ± 1V (current limited) Volume mute (50dB att.) + 10 steps of 1.9dB Limiter 10dB above nominal level loudspeaker / headphone Gain Gain reduction due to number of open microphones (NOM): ÷ NOM ± 1 dB Total Harmonic Distortion Nominal input (85 dB SPL): Max. input (110 dB SPL): Sample Rate Recording: 32kHz Playback: 32, 44.1, 48kHz Bit Rate Recording: 64, 96, 128, 192, 256 KBit/sec Playback: any bitrate Mount Tabletop (portable or fixed) 19-inch rack flush mounting Material Top: polymer Bottom: painted metal Color Charcoal and Black Dimensions (HxWxD) 3.4 x 14.2 x 5.6" (84 x 361 x 143mm) Height of feet: 0.22" (5.5mm) Weight 3.3 lb (1.5kg)

Description: Details iShopping.pk brings you the best price for Bosch CCS-CUD Control Unit For CCS 900 Ultro Conference System with express shipping all over Pakistan.   The Bosch CCS-CUD Control Unit is the central power and control station for all CCS 900 Ultro Conference System contributor units, such as the chairman and delegate units. The control unit will supply power for up to 50 delegate / chairman units, and provide control for up to 150. The unit features a built in speaker and automated, programmable control over contributor units without the need for an operator. Its Digital Acoustic Feedback Suppression (DAFS) eliminates feedback howling and maintains clear, intelligible speech. Plenty of connections allow for interfacing within paging systems, amplifier systems, recording devices and more. The unit is feature rich, however its control section is straightforward and intuitive to operate in any conference setting.   Features: Digital Acoustic Feedback Suppression The digital acoustic feedback suppression facility automatically eliminates acoustic feedback (also known as 'howling' or 'Larsen effect'). This gives better speech intelligibility by allowing the speaker volume to be turned up as loud as required without any risk of feedback. Discussion Control Without Operator The CU can be setup to operate standalone without the need for an operator. The following 5 modes can be chosen using a rotary control on the unit's top panel: • Open mode - allows selection of one to four microphones (excluded chairmen microphones) which can be simultaneously active • Open mode with auto-switch-off - allows selection of one to four microphones (excluded chairmen microphones) which can be simultaneously active. If the delegate does not speak for 30 seconds, microphones are automatically switched off • Override mode - delegates can override each other simply by activating their microphones. Only one microphone can be active at any one time. (Note: In override mode, delegates cannot override chairmen) • Chairman only mode - only chairmen can speak. Delegate microphones cannot be activated, even when a chairman is not speaking • Test mode - checks if system connections are correct. All microphone light rings and contribution unit LEDs light up to indicate that units are properly connected Supplies Power for up to 50 Contribution Units The CU has two trunk outputs for the loop-through connection of contribution units. It is possible to connect 25 contribution units to each trunk output, with a maximum system cable length of 109.3 yards (100m). Provides Control for up to 150 Contribution Units Up to 3 CUs can be used together in a discussion system to power and control a maximum of 150 contribution units. In this configuration a single CU acts as a master controller for the entire system. Built-in Monitor Loudspeaker The built-in monitor loudspeaker and headphone socket allow the conference to be monitored. Interfaces the System With External Equipment The following equipment can be interfaced to the CCS Ultro Discussion System through the CU: • External wired or wireless microphone - for guest speakers or audience participation. (Note: The external microphone is muted when the priority button on a chairman unit is pressed, and when the system is operating in 'chairman only' mode) • External PA system - for transmitting the proceedings to an audience in the same room or an adjacent room• Tape recorder - for external recording and playing back meetings and discussions • Audio equipment - for providing background music • Telephone coupler - to allow a remote delegate to participate via telephone• External audio processing - an insertion connector is provided Controls and Indicators (Top) • Mains on/off switch • Graphical display for status information (CCS‐CURD) • 5 soft buttons for configuration and control of thebuilt-in MP3 recorder (CCS‐CURD) • Loudspeaker volume control, for setting output level of loudspeakers of contribution units. This control also determines the maximum level for the headphone outputs of the contribution units and the CU. • Microphone mode rotary switch, for setting the number of simultaneously active microphones, and selecting one of the four operation modes (plus test mode) • Power on LED Controls and Indicators (Back) • On/off switch for digital acoustic feedback suppression facility (CCS‐CUD, CCS‐CURD)• Microphone input gain adjustment • External recorder input gain adjustment• Insertion connector bypass switch   Specifications: Connections Top • 1x 0.14" (3.5mm) stereo headphone socket Back • 1x AC input • 2x 7-pole circular female connectors, trunk in/out loop through interconnection  • 1x 3-pole female XLR connector, microphone input (can be used as line input by included 50dB attenuator) • 1 x Cinch connector pair, line input/output  • 1 x Cinch connector pair, telephone input/output • 1 x Cinch connector pair, insertion input/output  • 2 x Cinch connector pairs (R/L channel), external recorder input/output • USB interface (CCS-CURD) Power Supply Mains voltage: 100 to 240 VAC ± 10% Current consumption: maximum 0.9A (100 VAC) to 0.3 A (240 VAC) DC supply to contribution units: 24V ± 1V (current limited) Volume mute (50dB att.) + 10 steps of 1.9dB Limiter 10dB above nominal level loudspeaker / headphone Gain Gain reduction due to number of open microphones (NOM): ÷ NOM ± 1 dB Total Harmonic Distortion Nominal input (85 dB SPL): Max. input (110 dB SPL): Sample Rate Recording: 32kHz Playback: 32, 44.1, 48kHz Bit Rate Recording: 64, 96, 128, 192, 256 KBit/sec Playback: any bitrate Mount Tabletop (portable or fixed) 19-inch rack flush mounting Material Top: polymer Bottom: painted metal Color Charcoal and Black Dimensions (HxWxD) 3.4 x 14.2 x 5.6" (84 x 361 x 143mm) Height of feet: 0.22" (5.5mm) Weight 3.3 lb (1.5kg)

Description: Details iShopping.pk brings you the best price for Bosch CCS-CU Control Unit For CCS 900 Ultro Conference System U.S. Version with express shipping all over Pakistan.   The Bosch CCS-CU Control Unit is the central power and control station for all CCS 900 Ultro Conference System contributor units, such as the chairman and delegate units. The control unit will supply power for up to 50 delegate / chairman units, and provide control for up to 150. The unit features a built in speaker and automated, programmable control over contributor units without the need for an operator. Its Digital Acoustic Feedback Suppression (DAFS) eliminates feedback howling and maintains clear, intelligible speech. Plenty of connections allow for interfacing within paging systems, amplifier systems, recording devices and more. The unit is feature rich, however its control section is straightforward and intuitive to operate in any conference setting.   Features: Discussion Control Without Operator The CU can be setup to operate standalone without the need for an operator. The following 5 modes can be chosen using a rotary control on the unit's top panel: • Open mode - allows selection of one to four microphones (excluded chairmen microphones) which can be simultaneously active • Open mode with auto-switch-off - allows selection of one to four microphones (excluded chairmen microphones) which can be simultaneously active. If the delegate does not speak for 30 seconds, microphones are automatically switched off • Override mode - delegates can override each other simply by activating their microphones. Only one microphone can be active at any one time. (Note: In override mode, delegates cannot override chairmen) • Chairman only mode - only chairmen can speak. Delegate microphones cannot be activated, even when a chairman is not speaking • Test mode - checks if system connections are correct. All microphone light rings and contribution unit LEDs light up to indicate that units are properly connected Supplies Power for up to 50 Contribution Units The CU has two trunk outputs for the loop-through connection of contribution units. It is possible to connect 25 contribution units to each trunk output, with a maximum system cable length of 109.3 yards (100m). Provides Control for up to 150 Contribution Units Up to 3 CUs can be used together in a discussion system to power and control a maximum of 150 contribution units. In this configuration a single CU acts as a master controller for the entire system. Built-in Monitor Loudspeaker The built-in monitor loudspeaker and headphone socket allow the conference to be monitored. Interfaces the System With External Equipment The following equipment can be interfaced to the CCS Ultro Discussion System through the CU: • External wired or wireless microphone - for guest speakers or audience participation. (Note: The external microphone is muted when the priority button on a chairman unit is pressed, and when the system is operating in 'chairman only' mode) • External PA system - for transmitting the proceedings to an audience in the same room or an adjacent room • Tape recorder - for external recording and playing back meetings and discussions • Audio equipment - for providing background music • Telephone coupler - to allow a remote delegate to participate via telephone• External audio processing - an insertion connector is provided Controls and Indicators (Top) • Mains on/off switch • Graphical display for status information (CCS‐CURD) • 5 soft buttons for configuration and control of thebuilt-in MP3 recorder (CCS‐CURD) • Loudspeaker volume control, for setting output level of loudspeakers of contribution units. This control also determines the maximum level for the headphone outputs of the contribution units and the CU. • Microphone mode rotary switch, for setting the number of simultaneously active microphones, and selecting one of the four operation modes (plus test mode) • Power on LED Controls and Indicators (Back) • On/off switch for digital acoustic feedback suppression facility (CCS‐CUD, CCS‐CURD)• Microphone input gain adjustment • External recorder input gain adjustment • Insertion connector bypass switch   Specifications: Connections Top • 1x 0.14" (3.5mm) stereo headphone socket Back • 1x AC input • 2x 7-pole circular female connectors, trunk in/out loop through interconnection  • 1x 3-pole female XLR connector, microphone input (can be used as line input by included 50dB attenuator) • 1 x Cinch connector pair, line input/output  • 1 x Cinch connector pair, telephone input/output • 1 x Cinch connector pair, insertion input/output  • 2 x Cinch connector pairs (R/L channel), external recorder input/output • USB interface (CCS-CURD) Power Supply Mains voltage: 100 to 240 VAC ± 10% Current consumption: maximum 0.9A (100 VAC) to 0.3 A (240 VAC) DC supply to contribution units: 24V ± 1V (current limited) Volume mute (50dB att.) + 10 steps of 1.9dB Limiter 10dB above nominal level loudspeaker / headphone Gain Gain reduction due to number of open microphones (NOM): ÷ NOM ± 1 dB Total Harmonic Distortion Nominal input (85 dB SPL): Max. input (110 dB SPL): Sample Rate Recording: 32kHz Playback: 32, 44.1, 48kHz Bit Rate Recording: 64, 96, 128, 192, 256 KBit/sec Playback: any bitrate Mount Tabletop (portable or fixed) 19-inch rack flush mounting Material Top: polymer Bottom: painted metal Color Charcoal and Black Dimensions (HxWxD) 3.4 x 14.2 x 5.6" (84 x 361 x 143mm) Height of feet: 0.22" (5.5mm) Weight 3.3 lb (1.5kg)

Description: Details iShopping.pk brings you the best price for Bosch CCS-CUD Control Unit For CCS 900 Ultro Conference System U.S. Version with express shipping all over Pakistan.   The Bosch CCS-CUD Control Unit is the central power and control station for all CCS 900 Ultro Conference System contributor units, such as the chairman and delegate units. The control unit will supply power for up to 50 delegate / chairman units, and provide control for up to 150. The unit features a built in speaker and automated, programmable control over contributor units without the need for an operator. Its Digital Acoustic Feedback Suppression (DAFS) eliminates feedback howling and maintains clear, intelligible speech. Plenty of connections allow for interfacing within paging systems, amplifier systems, recording devices and more. The unit is feature rich, however its control section is straightforward and intuitive to operate in any conference setting.   Features: Digital Acoustic Feedback Suppression The digital acoustic feedback suppression facility automatically eliminates acoustic feedback (also known as 'howling' or 'Larsen effect'). This gives better speech intelligibility by allowing the speaker volume to be turned up as loud as required without any risk of feedback. Discussion Control Without Operator The CU can be setup to operate standalone without the need for an operator. The following 5 modes can be chosen using a rotary control on the unit's top panel: • Open mode - allows selection of one to four microphones (excluded chairmen microphones) which can be simultaneously active • Open mode with auto-switch-off - allows selection of one to four microphones (excluded chairmen microphones) which can be simultaneously active. If the delegate does not speak for 30 seconds, microphones are automatically switched off • Override mode - delegates can override each other simply by activating their microphones. Only one microphone can be active at any one time. (Note: In override mode, delegates cannot override chairmen) • Chairman only mode - only chairmen can speak. Delegate microphones cannot be activated, even when a chairman is not speaking • Test mode - checks if system connections are correct. All microphone light rings and contribution unit LEDs light up to indicate that units are properly connected Supplies Power for up to 50 Contribution Units The CU has two trunk outputs for the loop-through connection of contribution units. It is possible to connect 25 contribution units to each trunk output, with a maximum system cable length of 109.3 yards (100m). Provides Control for up to 150 Contribution Units Up to 3 CUs can be used together in a discussion system to power and control a maximum of 150 contribution units. In this configuration a single CU acts as a master controller for the entire system. Built-in Monitor Loudspeaker The built-in monitor loudspeaker and headphone socket allow the conference to be monitored. Interfaces the System With External Equipment The following equipment can be interfaced to the CCS Ultro Discussion System through the CU: • External wired or wireless microphone - for guest speakers or audience participation. (Note: The external microphone is muted when the priority button on a chairman unit is pressed, and when the system is operating in 'chairman only' mode) • External PA system - for transmitting the proceedings to an audience in the same room or an adjacent room • Tape recorder - for external recording and playing back meetings and discussions • Audio equipment - for providing background music • Telephone coupler - to allow a remote delegate to participate via telephone• External audio processing - an insertion connector is provided Controls and Indicators (Top) • Mains on/off switch • Graphical display for status information (CCS‐CURD) • 5 soft buttons for configuration and control of thebuilt-in MP3 recorder (CCS‐CURD) • Loudspeaker volume control, for setting output level of loudspeakers of contribution units. This control also determines the maximum level for the headphone outputs of the contribution units and the CU. • Microphone mode rotary switch, for setting the number of simultaneously active microphones, and selecting one of the four operation modes (plus test mode) • Power on LED Controls and Indicators (Back) • On/off switch for digital acoustic feedback suppression facility (CCS‐CUD, CCS‐CURD)• Microphone input gain adjustment • External recorder input gain adjustment • Insertion connector bypass switch   Specifications: Connections Top • 1x 0.14" (3.5mm) stereo headphone socket Back • 1x AC input • 2x 7-pole circular female connectors, trunk in/out loop through interconnection  • 1x 3-pole female XLR connector, microphone input (can be used as line input by included 50dB attenuator) • 1 x Cinch connector pair, line input/output  • 1 x Cinch connector pair, telephone input/output • 1 x Cinch connector pair, insertion input/output  • 2 x Cinch connector pairs (R/L channel), external recorder input/output • USB interface (CCS-CURD) Power Supply Mains voltage: 100 to 240 VAC ± 10% Current consumption: maximum 0.9A (100 VAC) to 0.3 A (240 VAC) DC supply to contribution units: 24V ± 1V (current limited) Volume mute (50dB att.) + 10 steps of 1.9dB Limiter 10dB above nominal level loudspeaker / headphone Gain Gain reduction due to number of open microphones (NOM): ÷ NOM ± 1 dB Total Harmonic Distortion Nominal input (85 dB SPL): Max. input (110 dB SPL): Sample Rate Recording: 32kHz Playback: 32, 44.1, 48kHz Bit Rate Recording: 64, 96, 128, 192, 256 KBit/sec Playback: any bitrate Mount Tabletop (portable or fixed) 19-inch rack flush mounting Material Top: polymer Bottom: painted metal Color Charcoal and Black Dimensions (HxWxD) 3.4 x 14.2 x 5.6" (84 x 361 x 143mm) Height of feet: 0.22" (5.5mm) Weight 3.3 lb (1.5kg)

Description: Details iShopping.pk brings you the best price for Vivitek Qumi Q3 Plus Pico HD LED Pocket Wi-Fi Projector Black with 1 year international warranty and express shipping all over Pakistan.   Features:   • Maximum Brightness of 500 Lumens   •  HD 1280 x 720 Native Resolution •  5000:1 Contrast Ratio   •  30,000-Hour LED Life   •  Built-In Wi-Fi & Bluetooth Connectivity   •  Integrated Android 4.4.2 OS   •  Up to 2-Hour Battery Life •  microSD & USB Host Reader   Specification: Image Display Display System 0.3" / 0.76 cm DMD DLP Native Resolution 1280 x 720() Supported Resolutions Maximum: Full HD 1080p - 1920 x 1080 @ 60Hz Supported Formats Video: AVI, DAT, FLV, MOV, MPEG, RM, RMVB, TS, VOB, WMV Data: DOC, PDF, PPT, XLS Photo: BMP, GIF, JPEG, PNG Audio: AAC, AC3, MP3, OGG, WAV, WMA Format NTSC PAL SECAM Pixels 921600 Brightness High Brightness Mode: 500 Lumens Offset 100%  Aspect Ratio Native: 16:9 Contrast Ratio 208.334 Scan Vertical: 43 - 85 Hz                                                    Horizontal: 30 - 90 kHz or 15 kHz Lens Lens Not specified by manufacturer Throw Distance 2.3 - 12.1' / 0.7 - 3.7 m Throw Ratio 1.66:1 Projection Size 19 - 100" / 48.26 - 254.00 cm (Max Diagonal: 100" / 254.00 cm)  Features Keystone Correction Vertical: + 35° Ceiling Mountable Yes Rear Screen Projection Yes Built-In Speaker Yes, 2 W (Stereo) Internal Memory 5.1 GB Input/Output Connectors Inputs/Outputs 1x HDMI Audio/Video (Input) 2x USB Type-A Female (Input) 1x 1/8" (3.5 mm) Mini Audio/Video (Input/Output) 1x microSD Expansion Slot (Input) Wireless LAN Yes General Lamp (Bulb) 1x LED Light Source LED Life Normal Mode: 30000 Hours Fan Noise Normal Mode: 33 dB Remote Control Yes Power Requirements 100-240 VAC, 50/60 Hz Battery Rechargeable Lithium-Ion Polymer Battery Pack, 8000 mAh Max Runtime: 2 Hours per Charge Power Consumption Normal Mode: 36 W Standby Mode:  Dimensions (WxHxD) 6.9 x 1.1 x 4.0" / 17.5 x 2.8 x 10.2 cm Weight 1 lb / .5 kg   Display your presentations virtually anywhere with the black  Vivitek Qumi Q3 Plus 500-Lumen HD Pico Projector  thanks to its built-in 2-hour battery. At only 1 lb, it's easy to transport, and the built-in speakers allow you to hear the audio without the need for an external speaker system. It provides up to 500 lumens of brightness with a 5000:1 contrast ratio and a native resolution of 1280 x 720 for clear images at most sizes. The Q3 Plus includes an HDMI cable and a remote control for added convenience.   DLP Technology DLP chipset-based projectors are designed to produce vivid images with enhanced clarity and precision. The DLP chip uses millions of tiny mirrors to reflect the light to project an image on the screen. DLP technology delivers high contrast ratios and minimizes the gaps between pixels for bright, sharp pictures.   BrilliantColor Technology BrilliantColor from Texas Instruments is a multi-color processing technology designed to produce vibrant images. BrilliantColor technology uses up to six colors, instead of just the three primary colors (red, green, and blue), to enhance color accuracy and brighten secondary colors.   DLP TRP Pixel Architecture and Chipsets Texas Instruments' DLP TRP pixel architecture and adaptive DLP IntelliBright algorithms are designed to achieve enhanced visual fidelity. Capable of outputting twice the resolution of typical DLP Pico chipsets, the TRP architecture enables the development of smaller form factors.   Integrated Battery for Cable-Free Operation Thanks to the integrated two-hour battery, you won't be dependent on any plug-in energy source to project. Whether it's a garden party, a weekend backpack trip, or simply the electricity point being out of reach, just unpack your Qumi Q3 Plus, turn it on, and enjoy the show.   Enhanced Connectivity The Vivitek Qumi Q3 Plus gives you a number of popular connections, including an 1/8" A/V, HDMI, a microSD slot, and two USB ports. Bluetooth connectivity is also available, allowing you to pair the Qumi with optional speakers for augmented audio or with your mouse/keyboard for easier navigation through the integrated Android OS.   Screen Mirroring Turn any content from your mobile phone or tablet into a large-screen projection instantly with the Qumi Q3 Plus.   Filter-Free Design DLP technology allows manufacturers to create a filter-free projection design. Filter-free means savings and lower maintenance efforts over the projector's lifespan, which means a lower total cost of ownership for the projector. Features • Easily connect and project, without the hassle of cables, over Wi-Fi. •  Native HD 720p resolution with HD 1080p compatibility. •  500 lumens of brightness and a 5000:1 contrast ratio for vivid and detailed images. •  Project a large widescreen image up to 100" diagonal. •  Digital auto keystone correction with motorized focus for ease of operation. •  Quad-core CPU at 1.5 GHz on an Android 4.4.2 operating system. •  LED Light Engine for durability and an estimated 30,000+ hours of operation. •  Wirelessly mirror and project documents, photos, movies, and other content from your compatible mobile device. •  Bluetooth-enabled for easy and convenient connectivity to other devices such as speakers, a keyboard, or a mouse. •  Integrated media and document viewer conveniently displays documents, photos, videos, or audio files, without connecting to a computer, from a USB or microSD or directly from the on-board memory, which is expandable to 64GB with an optional microSD card •  Two built-in 2W speakers with multiple audio ports for easy connection to other audio devices. •  A tripod mount and swing-out front foot allows quick and convenient setup •  The compact and lightweight profile, at only 1 lb, gives enhanced mobile flexibility

Description: Details iShopping.pk brings you the best price for Vivitek Qumi Q3 Plus Pico HD LED Pocket Wi-Fi Projector Gold with 1 year international warranty and express shipping all over Pakistan.   Features:   • Maximum Brightness of 500 Lumens  • HD 1280 x 720 Native Resolution  • 5000:1 Contrast Ratio  • 30,000-Hour LED Life  • Built-In Wi-Fi & Bluetooth Connectivity  • Integrated Android 4.4.2 OS  • Up to 2-Hour Battery Life  • microSD & USB Host Reader  • Remote Control & HDMI Cable Included   Specification: Image Display Display System 0.3" / 0.76 cm DMD DLP Native Resolution 1280 x 720() Supported Resolutions Maximum: Full HD 1080p - 1920 x 1080 @ 60Hz Supported Formats Video: AVI, DAT, FLV, MOV, MPEG, RM, RMVB, TS, VOB, WMV Data: DOC, PDF, PPT, XLS Photo: BMP, GIF, JPEG, PNG Audio: AAC, AC3, MP3, OGG, WAV, WMA Format NTSC PAL SECAM Pixels 921600 Brightness High Brightness Mode: 500 Lumens Offset 100%  Aspect Ratio Native: 16:9 Contrast Ratio 208.334 Scan Vertical: 43 - 85 Hz Horizontal: 30 - 90 kHz or 15 kHz Lens Lens Not specified by manufacturer Throw Distance 2.3 - 12.1' / 0.7 - 3.7 m Throw Ratio 1.66:1 Projection Size 19 - 100" / 48.26 - 254.00 cm (Max Diagonal: 100" / 254.00 cm)  Features Keystone Correction Vertical: + 35° Ceiling Mountable Yes Rear Screen Projection Yes Built-In Speaker Yes, 2 W (Stereo) Internal Memory 5.1 GB Input/Output Connectors Inputs/Outputs 1x HDMI Audio/Video (Input) 2x USB Type-A Female (Input) 1x 1/8" (3.5 mm) Mini Audio/Video (Input/Output) 1x microSD Expansion Slot (Input) Wireless LAN Yes General Lamp (Bulb) 1x LED Light Source LED Life Normal Mode: 30000 Hours Fan Noise Normal Mode: 33 dB Remote Control Yes Power Requirements 100-240 VAC, 50/60 Hz Battery Rechargeable Lithium-Ion Polymer Battery Pack, 8000 mAh Max Runtime: 2 Hours per Charge Power Consumption Normal Mode: 36 W Standby Mode:  Dimensions (WxHxD) 6.9 x 1.1 x 4.0" / 17.5 x 2.8 x 10.2 cm Weight 1 lb / .5 kg   Display your presentations virtually anywhere with the gold Vivitek Qumi Q3 Plus 500-Lumen HD Pico Projector thanks to its built-in 2-hour battery. At only 1 lb, it's easy to transport, and the built-in speakers allow you to hear the audio without the need for an external speaker system. It provides up to 500 lumens of brightness with a 5000:1 contrast ratio and a native resolution of 1280 x 720 for clear images at most sizes. The Q3 Plus includes an HDMI cable and a remote control for added convenience.   DLP Technology DLP chipset-based projectors are designed to produce vivid images with enhanced clarity and precision. The DLP chip uses millions of tiny mirrors to reflect the light to project an image on the screen. DLP technology delivers high contrast ratios and minimizes the gaps between pixels for bright, sharp pictures.   BrilliantColor Technology BrilliantColor from Texas Instruments is a multi-color processing technology designed to produce vibrant images. BrilliantColor technology uses up to six colors, instead of just the three primary colors (red, green, and blue), to enhance color accuracy and brighten secondary colors.   DLP TRP Pixel Architecture and Chipsets Texas Instruments' DLP TRP pixel architecture and adaptive DLP IntelliBright algorithms are designed to achieve enhanced visual fidelity. Capable of outputting twice the resolution of typical DLP Pico chipsets, the TRP architecture enables the development of smaller form factors.   Integrated Battery for Cable-Free Operation Thanks to the integrated two-hour battery, you won't be dependent on any plug-in energy source to project. Whether it's a garden party, a weekend backpack trip, or simply the electricity point being out of reach, just unpack your Qumi Q3 Plus, turn it on, and enjoy the show.   Enhanced Connectivity The Vivitek Qumi Q3 Plus gives you a number of popular connections, including an 1/8" A/V, HDMI, a microSD slot, and two USB ports. Bluetooth connectivity is also available, allowing you to pair the Qumi with optional speakers for augmented audio or with your mouse/keyboard for easier navigation through the integrated Android OS.   Screen Mirroring Turn any content from your mobile phone or tablet into a large-screen projection instantly with the Qumi Q3 Plus.   Filter-Free Design DLP technology allows manufacturers to create a filter-free projection design. Filter-free means savings and lower maintenance efforts over the projector's lifespan, which means a lower total cost of ownership for the projector.   Features: • Easily connect and project, without the hassle of cables, over Wi-Fi. • Native HD 720p resolution with HD 1080p compatibility. • 500 lumens of brightness and a 5000:1 contrast ratio for vivid and detailed images. • Project a large widescreen image up to 100" diagonal. • Digital auto keystone correction with motorized focus for ease of operation. • Quad-core CPU at 1.5 GHz on an Android 4.4.2 operating system. • LED Light Engine for durability and an estimated 30,000+ hours of operation. • Wirelessly mirror and project documents, photos, movies, and other content from your compatible mobile device. • Bluetooth-enabled for easy and convenient connectivity to other devices such as speakers, a keyboard, or a mouse. • Integrated media and document viewer conveniently displays documents, photos, videos, or audio files, without connecting to a computer, from a USB or microSD or directly from the on-board memory, which is expandable to 64GB with an optional microSD card • Two built-in 2W speakers with multiple audio ports for easy connection to other audio devices. • A tripod mount and swing-out front foot allows quick and convenient setup • The compact and lightweight profile, at only 1 lb, gives enhanced mobile flexibility

Description: Details Video Conferencing Resolution  Delivered All Over Pakistan iShopping.pk brings you the best price for Grandstream 4K Ultra HD Video Conferencing Resolution (GVC3210) with express shipping all over Pakistan   Designed to allow users to customize their solution according to their specific communication needs, the GVC3210 can be paired with most video and web conferencing services to create a multi-point conferencing system. This video conferencing endpoint runs on the Android operating system and offers full access to the Google Play Store. This allows users to utilize any Android conferencing or communication application. The GVC3210 comes equipped with sophisticated Noise-Shield technology to block out background noise and maximize audio quality. Additional features include advanced 4-microphone array with beam-forming capability, a high-end 16M pixel CMOS sensor with ePTZ for easy camera view adjustments and Miracast wireless for convenient content sharing. This simple yet powerful video conferencing endpoint is the ideal choice for SMBs looking for a price-friendly option that still carries the high-end features needed to sustain high-quality business communications.   Features: • Sharp HD video resolutions up to 4k Ultra HD • Runs on Android 6.x operating system with full access to applications in the Google Play store • Built-in Bluetooth for use with Bluetooth speakers/ microphones, keyboards, data exchange, etc. • Integrated dual band WiFi to pair with video and web conferencing service • Built-in 4-MIC array with beam-forming, support for external audio equipment and innovative Noise Shield technology • Advanced camera with 16M pixel CMOS sensor, 90 FOV wideangle lens and ePTZ for easy camera view adjustments • Support for Miracast wireless content sharing to share a presentation with conference attendees • Integrated 1x HDMI in, 2x HDMI out, and 2x USB