1v

Voltage: 11.1V 12V 12.6V Current: 25A (operating current) Over-current: 75A (overcurrent peak) Working temperature: -30 / + 80 Size: 56*45*4.0mm

DESCRIPTION HDMI Cable 4k HDMI Cord High Speed HDMI to HDMI Cable 4K for TV@60HZ,UHD, Support and Compatible with LCD TV, Laptop, Monitor, Projector, PS4 b'&' Xbox, etc... Gold-Plate, oxygen-free HDMI connector for maximum and stable connection. Note -- - -- •Brand new cable. Interested ppl can ilx chat, call or Whatsapp for further info. P.e.c.h.s Ll Karachi, Pechs, Karachi, Sindh, Pakistan

  TECH SPECS Headphones Frequency Response:  20 – 20,000 Hz Impedance:  32 Ω at 1kHz Sensitivity  (@1kHz, 1V/Pa): 110 ± 4dB at 1 kHz Max Input Power:  50 mW Drivers:  40 mm, with Neodymium Magnets Inner Ear Cup Diameter:  50 mm / 1.97” Cable Length: 1.3 m / 4.27 ft plus 2m / 6.6 ft splitter adapter Approximate Weight:  293 g / 0.65 lbs Connector:  Analog 3.5 mm combined jack (headphone and mic) Microphone Frequency Response:  100 – 10,000 Hz Signal-to-Noise Ratio:  52 dB Sensitivity  (@1kHz, 1V/Pa): -40 ± 3dB Pick-up Pattern:  Unidirectional    

  Specifications Kraken Pro Neon Headphones Frequency Response: 20 – 20,000 Hz Impedance: 32 Ω at 1kHz Sensitivity (@1kHz, 1V/Pa): 110 ± 4dB at 1 kHz Max Input Power: 50 mW Drivers: 40 mm, with Neodymium Magnets Inner Ear Cup Diameter: 50 mm / 1.97” Cable Length: 1.3 m / 4.27 ft plus 2m / 6.6 ft splitter adapter Approximate Weight: 293 g / 0.65 lbs Connector: Analog 3.5 mm combined jack (headphone and mic) Microphone Frequency Response: 100 – 10,000 Hz Signal-to-Noise Ratio: 52 dB Sensitivity (@1kHz, 1V/Pa): -40 ± 3dB Pick-up Pattern: Unidirectional    

  Technical Specifications Wireless Headset Circumaural Design with 50mm Driver Units Volume & Mic Control Buttons on the Headset Detachable 2.5mm Microphone Cable Dimensions: 200mm(W) * 204mm(H) * 88mm(D) Headphones Radio Frequency: 2.4GHz Wireless Range: 33ft / 10m Frequency Response: 20 - 20,000 Hz Impedance: 32O at 1kHz Sensitivity (@1kHz, 1V/Pa): 105dB +/- 2dB Drivers: 50 mm, with Neodymium Magnets Batteries: 2 AAA Batteries (Up to 12 Hours Battery Life) Charging Time: 3 Hours Microphone Frequency Response: 130 - 10,000 Hz Sensitivity (@1kHz, 1V/Pa): -42 ± 2dB Signal-to-Noise Ratio: >55 dB Pick-up Pattern: Uni-directional Hardware Requirements Xbox 360® Composite Cable (or Component HD AV Cable) PC 3.5mm Headphone and Mic Cables* Available 3.5mm Headphone Jack Available 3.5mm Microphone Jack * 3.5mm headphone and mic cables required and sold separately    

  Technical Specifications Wireless Headset Circumaural Design with 50mm Driver Units Volume & Mic Control Buttons on the Headset 3 Preset EQ Detachable 2.5mm Microphone Cable Dimensions: 200mm(W) * 204mm(H) * 88mm(D) Inner Ear Cup Diameter: 55 mm / 2.16” Approximate Weight (including batteries): 369 g / 0.81 lbs Headphones Radio Frequency: 5.8GHz Dolby® Headphone / Dolby Pro Logic® II / Dolby Digital Wireless Range: 33ft / 10m Frequency Response: 20 - 20,000 Hz Impedance: 32O at 1kHz Sensitivity (@1kHz, 1V/Pa): 105dB +/- 2dB Drivers: 50 mm, with Neodymium Magnets Batteries: 2 AAA Batteries (Up to 8 Hours Battery Life) Charging Time: 3 Hours Microphone Frequency Response: 130 - 10,000 Hz Sensitivity (@1kHz, 1V/Pa): -42 ± 2dB Signal-to-Noise Ratio: >55 dB Pick-up Pattern: Uni-directional Hardware Requirements Xbox 360® Available Optical Port PC RCA to 3.5mm Cable* Available 3.5mm Headphone Jack Available 3.5mm Microphone Jack * RCA to 3.5mm cable required and sold separately    

Battery type: Li-ion; Capacity: 5200mAh/58Wh;Voltage: 11.1V;Cells: 6-cell. Fit for 498482-001,513775-001,516915-001,EV06055,HSTNN-CB72,HSTNN-CB73,HSTNN-DB72,HSTNN-DB73 Up to 500 recharge cycles over the life of the battery. New Battery for HP 485041-001,485041-003,487296-001,487354-001,497694-001,497694-002,498482-001,513775-001 Battery type: Li-ion; Capacity: 5200mAh/58Wh;Voltage: 11.1V;Cells: 6-cell. Fit for 498482-001,513775-001,516915-001,EV06055,HSTNN-CB72,HSTNN-CB73,HSTNN-DB72,HSTNN-DB73 Up to 500 recharge cycles over the life of the battery. New Battery for HP 485041-001,485041-003,487296-001,487354-001,497694-001,497694-002,498482-001,513775-001

Zebra GK888T Desktop Label Printer / Barcode Printer Specifications Printer Specifications Resolution : 203dpi / 8 dots per mm Memory: Standard 8MB SDRAM; 8MB Flash Print Width: 4.09"/104mm Print Length: 39"/990mm Print Speed : 4" per sec/102mm per sec Media Sensors: Transmissive and reflective Media Characteristics Maximum label and liner length: 39"/900mm Maximum label and liner width:4.25"/108mm Maximum roll diameter: 5"/127mm O.D. on a 1"/25.4mm I.D. core Core diameter: 1"/25.4mm to 1.5"/38mm Using media adaptor plates(included): 2.0"/50.8mm,2. 5"/63.5mm and 3"/76.2mm Media thickness: 0.003" /(0.08 mm) to 0.0075" /(0.19 mm) Media types: Roll-fed or fanfold, die cut or continuous, deirect thermal labels with or without black mark, tag stock Ribbon Characteristics Outside diameter: 1.36"/35mm Standard length: 244"/74m using 0.000328" ribbon thickness Width: 1.30"/33mm to 4.30"/110mm Ribbon setup: Ribbon wound ink side out Core I.D.: 0.5"/13mm Operating Characteristics Environmental Operating temperature: 40° F /5° C to 105° F /41° C Storage temperatures: -40° F/-40° C to 140° F /60° C Operating humidity: 10-90% non-condensing R.H. Storage humidity: 5-95% non-condensing R.H. Electrical Auto-detecable (PFC Compliant) 100-240 VAC, 50-60 Hz Agency approvals CCC, BSMI Physical Characteristics Width: 7.9"/201mm Depth: 8.2"/208mm Height: 6.7"/170mm Weight: 3.0Ibs/1.4kg Communication and Interface Capabilities Centronics parallel (36 pin) connector ports RS-232 serial inferface USB 1.1v

Type: Li-ion Voltage: 11.1V Capacity:97WH Compatibility: M4600 M4700 M6600 Part number: J5CG3 /1C75X/3DJH7,97KRM/FV993/FJJ4W,KJ321 / RY6WH / R7PND,9GP08 / FVWT4 / PG6RC,V7M28 / 0TN1K5 / X57F1,312-1176/312-1177,312-1178/312-1354 Website https://mygadget.pk/product/dell-precision-m4600-m4700-m4800-m6600-m6700-m6800-fv993-pg6rc-r7pnd-0tn1k5-v7m28-7dwmt-jhyp2-k4rdx-9-cell-100-original-battery-4-months-warranty

  Specifications Headphone Frequency response: 30 – 24.000 Hz Impedance: 16 Ohm SPL@1kHz, 1V rms: 90 dB Cable length: 1,2 m = 3,3 ft. Jack: 3,5 mm    

  Specifications Headphones Freq. response: 18 – 22,000 Hz Impedance: 32 Ohms SPL (@ 1 kHz, 1 Vrms): 114 dB Cable: 3.0 meters Microphone Freq. response: 80 – 15,000 Hz Sensitivity (@ 1 kHz, 1V/Pa): -38 dB Impedance: ~2 kOhms Pick-up pattern: Uni-directional    

  Specifications Headphones Frequency response:  20 - 20,000 Hz Impedance:  32 Ω at 1kHz Sensitivity (@1kHz, 1V/Pa):  110 ± 4dB at 1 kHz max Input power:  50 mW Drivers:  40 mm, with neodymium magnets Inner ear cup diameter:  50 mm / 0.16 ft Cable length:  1.3 m / 4.27 ft plus 2m / 6.6 ft splitter adapter Approximate weight:  300 g / 0.66 lbs Connector:  Analog 3.5 mm combined jack (headphone and mic) Microphone Frequency response:  100 – 10,000 Hz Signal-to-noise ratio:  52 dB Sensitivity (@1 kHz, 1 V/Pa):  -40 ± 3 dB Pick-up pattern:  Unidirectional In-line control Analog volume control wheel Microphone quick mute toggle    

  Headphones Frequency response:  20 – 20,000 Hz Impedance:  32 Ω at 1kHz Sensitivity (@1kHz, 1V/Pa):  110 ± 4dB at 1 kHz max Input power:  50 mW Drivers:  40 mm, with neodymium magnets Inner ear cup diameter:  50 mm / 0.16 ft Connector:  Analog 3.5 mm headphone jack Cable length:  1.3 m / 4.27 ft Approximate weight:  315 g / 0.69 lbs Microphone Frequency response:  100 – 10,000 Hz Signal-to-noise ratio:  55 dB Sensitivity (@1 kHz):  -42 ± 3 dB Pick-up pattern:  Omnidirectional In-line remote Center remote button Volume control button    

  TECH SPECS At a glance Works with PlayStation, Xbox, PC, Mac, mobile Lightweight memory foam cushions 50 mm audio drivers Retractable boom mic 3.5 mm connector Compatible Devices Most devices with a 3.5mm audio port Audio Frequency Response: 12 – 28,000 Hz Drivers: 50 mm, with Neodymium Magnets Impedance: 32Ω at 1kHz Surround Sound Stereo Connectivity Wired, Analog 3.5mm Controls In-line volume controls Microphone Retractable Uni-directional Boom Microphone Frequency Response: 100 – 10,000 Hz Sensitivity (@1kHz, 1V/Pa): -38 ± 3dB Signal-to-Noise Ratio: >55 dB Battery Life N/A Headphone Stand No BaseStation receiver No Others Circumaural Design with 50mm Driver Units providing crystal clear audio Leatherette Ear Cushions for maximum comfort Compatible with PlayStation, Xbox, PC, Mac, Mobile Dimensions of headset: 196mm(W) * 214mm(H) * 104.8mm(D)      

Description: Details Synco Microphone Delivered All Over Pakistan   iShopping.pk brings you the best price for Synco On-Camera Shotgun Microphone with Shock Mount (Mic-M1) with express shipping all over Pakistan.   SYNCO Mic-M1 is a mini, light DSLR microphone. It adopts a cardioid electret condenser that makes it more sensitive to sound details, a shock mount that mitigates unwanted shocks and vibrations, and a specialized windshield that protects the sound recording from environment noises. It is applicable to DSLR, smartphone, camcorder, audio mixer, recorder, and PC, and is suitable for interview, vlogging, outdoor filming, etc.   Specifications: Transducer                                     Electret Condenser Polar Pattern Cardioid Frequency Response 35Hz to 18KHz Signal/Noise 76dB Sensitivity  -42dB±2dB (0dB=1V/Pa,1KHz) Connector 3.5mm TRS and TRRS Connector Dimensions Φ22*81mm   Wide Device Compatibility This professional mic offers 2 kinds of cables, a 3.5mm TRS cable for camera series and a 3.5mm TRRS cable for phone series. A cold shoe mount is used for installing the mic to DSLR, mirrorless cameras, etc.   Professional Shockproof Design The mic suspension design with soft rubber allows the mic to suspend over other components. It works with the shock mount to greatly reduce unwanted vibrations and the recording, therefore is more steady   10dB Noise Reduction with Windshield The on camera microphone M1 has a specialized windshield that protects sound recording from interference and improves the audio quality. Noises under 10dB can be suppressed with the windshield.   High-class Cardioid Condenser Capsule M1 small DSLR microphone uses a Φ22 cardioid condenser capsule to achieve high sensitivity. It is ideal for capturing human voice in interviews, dialog, vlog, etc. with minimized background noises and more sound details.   No Battery Required Powered by the camera, the microphone for camera Mic-M1 requires no battery, which makes it mini and light, free from the hassle of charging and current interference. The plug-and-play design saves setup time and reduces workload.   Durable Metal Housing Protected by a metal housing, Mic-M1, one of the best mics for DSLR recording, avoids interference from usual radiofrequency. It contributes to a better recording effect and longer life span.

Description: Details Lavalier Microphone  Delivered All Over Pakistan iShopping.pk brings you the best price for Boya Clip-on Lavalier Microphone For iOS Devices (BY-M2) with express shipping all over Pakistan.   Details: Transducer Principle:  Condenser Microphone  iOS System Compatibility:  iOS 8.0 or Later  Polar Pattern:   Omnidirectional  Signal to Noise Ratio:  76dB or more  Frequency Response:  50 Hz-20 kHz  Sensitivity:  -40dB+/-3dB (0dB=1V/Pa, at 1KHz)  Bit Rate:  16Bit, 24Bit                                                                                                                                          Sampling Rates:  44.1 / 48 kHz  Power Requirement:  Powered via Connection to iOS Device  Cable Length:  6m (19.7’)

Description: Details Synco Microphone Delivered All Over Pakistan   iShopping.pk brings you the best price for Synco Dual-Head Condenser Lavalier Microphone with express shipping all over Pakistan.   Dual-head condenser lavalier microphone SYNCO Lav-S6D combines CVC automatic noise reduction and SYNCO audio decoding technology to deliver high-quality sound with rich details and less noise. With a 19.7-feet durable audio cable, it picks up two sound sources at greater distances simultaneously. It is ideal for interviews, conferences, YouTube podcasting, teaching, video recording, etc   Specifications: Transducer Electret Condenser Polar Pattern Omni-directional Frequency Range 60HZ-19KHz Signal/Noise 75dB Sensitivity -30dB +/-3dB/ 0dB=1V/Pa,1KHz Output Impedance 1000 Ohm Audio Cable 6 meters/19.7ft Connector 3.5mm (1/8") 4-pole gold plug Battery Type LR44 Dimensions Ф17.5*50mm   Dual Head Lavalier Microphone SYNCO Lav-S6D collar microphone adopts a unique dual-mic design to record two sound sources in one device. There is no need to move the mic from one speaker to the other when it is the simultaneous recording of 2 voices. SYNCO Lav-S6D Dual Head Lavalier Microphone   Wide Device Compatibility The PHONE/ CAMERA mode switch, with accessories 3.5mm TRS/TRRS connector and 6.3mm adapter, allows Lav-S6D lapel mic to get adapted to a smartphone, DSLR, camcorder, audio recorder, mixer, laptop, PC, etc.   High-Quality Material SYNCO S6D collar microphone provides 2 specialized windshields to reduce wind noise to get pretty good recording result even in a noisy environment. Robust audio cable and metal plug extend its life span.   Omnidirectional Condenser Capsule With an omnidirectional condenser capsule, this SYNCO high quality lapel microphone boasts higher sensitivity and greater frequency response. It equally picks up sound at 360° around it and faithfully reproduces natural sound.   Intelligent Sound Processing S6D lav mic runs 2 technologies - CVC noise reduction technology and SYNCO audio decoding technology - to reduce low-frequency noise generated by electrical current and improves the recording result.   19.7ft Ultra Long Cord 19.7 Feet (6 meters) high-quality cord for each head delivers audio signals to the device steadily, rapidly, and truly. Speakers can keep a greater distance from each other and from the device, thus the filming is more flexible.

Description: Details Boya Microphone Delivered All Over Pakistan   iShopping.pk brings you the best price for Boya Clip-on Lavalier Microphone For iOS Devices (BY-M2) with express shipping all over Pakistan   Details: Transducer Principle:  Condenser Microphone  iOS System Compatibility:  iOS 8.0 or Later  Polar Pattern:   Omnidirectional  Signal to Noise Ratio:  76dB or more  Frequency Response:  50 Hz-20 kHz  Sensitivity:  -40dB+/-3dB (0dB=1V/Pa, at 1KHz)  Bit Rate:  16Bit, 24Bit                                                                                                                                          Sampling Rates:  44.1 / 48 kHz  Power Requirement:  Powered via Connection to iOS Device  Cable Length:  6m (19.7’)

Description: Details iShopping.pk brings you the best price for Boya Lavalier Microphone Black (BY-M1) with express shipping all over Pakistan.   Details: BOYA BY M1 Lavalier Microphone: BOYA is a high-quality condenser microphones brand; it creates the true nature of sensory experience customers. This BY-M1 microphone with clip-on mic is specially designed for smartphones, DSLR, Camcorders, audio recorders, PC, etc. Features: •  Superb sound for presentations and video recording •  Clip-on microphone design for smartphones, DSLR, camcorders, etc •  Omni directional condenser microphone •  High-quality condenser is ideal for video use •  Low handling noise Specifications: •  Transducer: Electret Condenser •  Frequency Range: 65Hz-18KHz •  Signal/Noise: 74dB SPL •  Sensitivity: -30dB +/-3dB / 0dB=1V/Pa, 1kHz •  Output Impedance: 1000 Ohm or less •  Connector: 3.5mm (1/8") 4-pole gold plug •  Battery Type: LR44 •  Dimensions: Microphone: approx.18.00mmH x 8.30mmW x 8.30mmD; Cable: 6.0m •  Weight: Microphone: approx.2.5g; Power Module: approx.18g

Description: Details iShopping.pk brings you the best price for Ibuks Microphone Black (BY-M1DM) with express shipping all over Pakistan.   Details: Omnidirectional Polar Pattern: The Omnidirectional Polar Pattern Provides Excellent Off Axis Response, Even If A Subject Turns Their Head While Speaking. It's Perfect For Interviews, Presentations, Podcasts, Webcasts, Or Any Situation Where More Than One Subject Needs To Be Recorded. Its 4m Cable Provides 2.8m Of Distance Between Each Microphone For Comfortable Placement, While The Included Tie Clips Allow For Handsfree Use. Designed For Recording Interviews: Excellent For Interviews, The Dual Omnidirectional Lavalier Microphones Can Record Two Sound Resources At The Same Time. Wide Range Of Compatibility: Compatible For Smartphones, Cameras, Camcorders, Audio Recorders, Tablets, And Other Audio/Video Recording Devices. The BOYA BYM1DM Is A Dual Lavalier Universal Microphone, With A Single 1/8inch Stereo Connector, It Can Be Used With Smartphones, DSLR Cameras, Camcorders, Audio Recorders, PC And Other Recording Deceives. • Cable Length: 4m/13inch •  Signal/Noise: 74dB SPL •  Polar Pattern: Omnidirectional •  Transducer: Electret Condenser • Frequency Range: 65Hz~18KHz • Power Requirement: LR44 (Included) • Output Impedance: 1000 Ohm Or Less • Connector: 3.5mm(1/8inch)4pole Gold Plug • Sensitivity: 30dB±3dB / 0dB=1V/Pa, 1kHz

Description: Details iShopping.pk brings you the best price for Boya Lavalier Microphone Black (BY-M1DM) with express shipping all over Pakistan.   Details: Omnidirectional Polar Pattern: The Omnidirectional Polar Pattern Provides Excellent Off Axis Response, Even If A Subject Turns Their Head While Speaking. It's Perfect For Interviews, Presentations, Podcasts, Webcasts, Or Any Situation Where More Than One Subject Needs To Be Recorded. Its 4m Cable Provides 2.8m Of Distance Between Each Microphone For Comfortable Placement, While The Included Tie Clips Allow For Handsfree Use. Designed For Recording Interviews: Excellent For Interviews, The Dual Omnidirectional Lavalier Microphones Can Record Two Sound Resources At The Same Time. Wide Range Of Compatibility: Compatible For Smartphones, Cameras, Camcorders, Audio Recorders, Tablets, And Other Audio/Video Recording Devices. The BOYA BYM1DM Is A Dual Lavalier Universal Microphone, With A Single 1/8inch Stereo Connector, It Can Be Used With Smartphones, DSLR Cameras, Camcorders, Audio Recorders, PC And Other Recording Deceives. • Cable Length: 4m/13inch •  Signal/Noise: 74dB SPL •  Polar Pattern: Omnidirectional •  Transducer: Electret Condenser • Frequency Range: 65Hz~18KHz • Power Requirement: LR44 (Included) • Output Impedance: 1000 Ohm Or Less • Connector: 3.5mm(1/8inch)4pole Gold Plug • Sensitivity: 30dB±3dB / 0dB=1V/Pa, 1kHz

Description: Details iShopping.pk brings you the best price for Eomobiles Lavalier Microphone Black (BY-M1DM) with express shipping all over Pakistan.   Details: Omnidirectional Polar Pattern: The Omnidirectional Polar Pattern Provides Excellent Off Axis Response, Even If A Subject Turns Their Head While Speaking. It's Perfect For Interviews, Presentations, Podcasts, Webcasts, Or Any Situation Where More Than One Subject Needs To Be Recorded. Its 4m Cable Provides 2.8m Of Distance Between Each Microphone For Comfortable Placement, While The Included Tie Clips Allow For Handsfree Use. Designed For Recording Interviews: Excellent For Interviews, The Dual Omnidirectional Lavalier Microphones Can Record Two Sound Resources At The Same Time. Wide Range Of Compatibility: Compatible For Smartphones, Cameras, Camcorders, Audio Recorders, Tablets, And Other Audio/Video Recording Devices. The BOYA BYM1DM Is A Dual Lavalier Universal Microphone, With A Single 1/8inch Stereo Connector, It Can Be Used With Smartphones, DSLR Cameras, Camcorders, Audio Recorders, PC And Other Recording Deceives. • Cable Length: 4m/13inch •  Signal/Noise: 74dB SPL •  Polar Pattern: Omnidirectional •  Transducer: Electret Condenser • Frequency Range: 65Hz~18KHz • Power Requirement: LR44 (Included) • Output Impedance: 1000 Ohm Or Less • Connector: 3.5mm(1/8inch)4pole Gold Plug • Sensitivity: 30dB±3dB / 0dB=1V/Pa, 1kHz

Description: Details iShopping.pk brings you the best price for Boya Lavalier Microphone Black (BY-M1) with express shipping all over Pakistan   B OYA BY M1 Lavalier Microphone  BOYA is a high-quality condenser microphones brand; it creates the true nature of sensory experience customers. This BY-M1 microphone with clip-on mic is specially designed for smartphones, DSLR, Camcorders, audio recorders, PC, etc.   Features: • Superb sound for presentations and video recording. • Clip-on microphone design for smartphones, DSLR, camcorders, etc. • Omni directional condenser microphone. • High-quality condenser is ideal for video use. • Low handling noise.   Specifications: • Transducer: Electret Condenser. • Frequency Range: 65Hz-18KHz. • Signal/Noise: 74dB SPL. • Sensitivity: -30dB +/-3dB / 0dB=1V/Pa, 1kHz. • Output Impedance: 1000 Ohm or less. • Connector: 3.5mm (1/8") 4-pole gold plug. • Battery Type: LR44. • Dimensions: Microphone: approx.18.00mmH x 8.30mmW x 8.30mmD; Cable: 6.0m. • Weight: Microphone: approx.2.5g; Power Module: approx.18g.

Description: Details iShopping.pk brings you the best price for Boya Microphone Black (BY-M1DM) with express shipping all over Pakistan.   Features: • Cable Length: 4m/13inch • Signal/Noise: 74dB SPL • Polar Pattern: Omnidirectional • Transducer: Electret Condenser • Frequency Range: 65Hz~18KHz • Power Requirement: LR44 (included) • Output Impedance: 1000 Ohm or less • Connector: 3.5mm(1/8inch)4pole gold plug • Sensitivity: 30dB±3dB / 0dB=1V/Pa, 1kHz

Description: Details iShopping.pk brings you the best price for Bosch CCS-CU Control Unit For CCS 900 Ultro Conference System with express shipping all over Pakistan.   The Bosch CCS-CU Control Unit is the central power and control station for all CCS 900 Ultro Conference System contributor units, such as the chairman and delegate units. The control unit will supply power for up to 50 delegate / chairman units, and provide control for up to 150. The unit features a built in speaker and automated, programmable control over contributor units without the need for an operator. Its Digital Acoustic Feedback Suppression (DAFS) eliminates feedback howling and maintains clear, intelligible speech. Plenty of connections allow for interfacing within paging systems, amplifier systems, recording devices and more. The unit is feature rich, however its control section is straightforward and intuitive to operate in any conference setting.   Features: Discussion Control Without Operator The CU can be setup to operate standalone without the need for an operator. The following 5 modes can be chosen using a rotary control on the unit's top panel: • Open mode - allows selection of one to four microphones (excluded chairmen microphones) which can be simultaneously active • Open mode with auto-switch-off - allows selection of one to four microphones (excluded chairmen microphones) which can be simultaneously active. If the delegate does not speak for 30 seconds, microphones are automatically switched off • Override mode - delegates can override each other simply by activating their microphones. Only one microphone can be active at any one time. (Note: In override mode, delegates cannot override chairmen) • Chairman only mode - only chairmen can speak. Delegate microphones cannot be activated, even when a chairman is not speaking • Test mode - checks if system connections are correct. All microphone light rings and contribution unit LEDs light up to indicate that units are properly connected Supplies Power for up to 50 Contribution Units The CU has two trunk outputs for the loop-through connection of contribution units. It is possible to connect 25 contribution units to each trunk output, with a maximum system cable length of 109.3 yards (100m). Provides Control for up to 150 Contribution Units Up to 3 CUs can be used together in a discussion system to power and control a maximum of 150 contribution units. In this configuration a single CU acts as a master controller for the entire system. Built-in Monitor Loudspeaker The built-in monitor loudspeaker and headphone socket allow the conference to be monitored. Interfaces the System With External Equipment The following equipment can be interfaced to the CCS Ultro Discussion System through the CU: • External wired or wireless microphone - for guest speakers or audience participation. (Note: The external microphone is muted when the priority button on a chairman unit is pressed, and when the system is operating in 'chairman only' mode) • External PA system - for transmitting the proceedings to an audience in the same room or an adjacent room• Tape recorder - for external recording and playing back meetings and discussions • Audio equipment - for providing background music • Telephone coupler - to allow a remote delegate to participate via telephone• External audio processing - an insertion connector is provided Controls and Indicators (Top) • Mains on/off switch • Graphical display for status information (CCS‐CURD) • 5 soft buttons for configuration and control of thebuilt-in MP3 recorder (CCS‐CURD) • Loudspeaker volume control, for setting output level of loudspeakers of contribution units. This control also determines the maximum level for the headphone outputs of the contribution units and the CU. • Microphone mode rotary switch, for setting the number of simultaneously active microphones, and selecting one of the four operation modes (plus test mode) • Power on LED Controls and Indicators (Back) • On/off switch for digital acoustic feedback suppression facility (CCS‐CUD, CCS‐CURD)• Microphone input gain adjustment • External recorder input gain adjustment• Insertion connector bypass switch   Specifications: Connections Top • 1x 0.14" (3.5mm) stereo headphone socket Back • 1x AC input • 2x 7-pole circular female connectors, trunk in/out loop through interconnection  • 1x 3-pole female XLR connector, microphone input (can be used as line input by included 50dB attenuator) • 1 x Cinch connector pair, line input/output  • 1 x Cinch connector pair, telephone input/output • 1 x Cinch connector pair, insertion input/output  • 2 x Cinch connector pairs (R/L channel), external recorder input/output • USB interface (CCS-CURD) Power Supply Mains voltage: 100 to 240 VAC ± 10% Current consumption: maximum 0.9A (100 VAC) to 0.3 A (240 VAC) DC supply to contribution units: 24V ± 1V (current limited) Volume mute (50dB att.) + 10 steps of 1.9dB Limiter 10dB above nominal level loudspeaker / headphone Gain Gain reduction due to number of open microphones (NOM): ÷ NOM ± 1 dB Total Harmonic Distortion Nominal input (85 dB SPL): Max. input (110 dB SPL): Sample Rate Recording: 32kHz Playback: 32, 44.1, 48kHz Bit Rate Recording: 64, 96, 128, 192, 256 KBit/sec Playback: any bitrate Mount Tabletop (portable or fixed) 19-inch rack flush mounting Material Top: polymer Bottom: painted metal Color Charcoal and Black Dimensions (HxWxD) 3.4 x 14.2 x 5.6" (84 x 361 x 143mm) Height of feet: 0.22" (5.5mm) Weight 3.3 lb (1.5kg)

Description: Details iShopping.pk brings you the best price for Bosch CCS-CUD Control Unit For CCS 900 Ultro Conference System with express shipping all over Pakistan.   The Bosch CCS-CUD Control Unit is the central power and control station for all CCS 900 Ultro Conference System contributor units, such as the chairman and delegate units. The control unit will supply power for up to 50 delegate / chairman units, and provide control for up to 150. The unit features a built in speaker and automated, programmable control over contributor units without the need for an operator. Its Digital Acoustic Feedback Suppression (DAFS) eliminates feedback howling and maintains clear, intelligible speech. Plenty of connections allow for interfacing within paging systems, amplifier systems, recording devices and more. The unit is feature rich, however its control section is straightforward and intuitive to operate in any conference setting.   Features: Digital Acoustic Feedback Suppression The digital acoustic feedback suppression facility automatically eliminates acoustic feedback (also known as 'howling' or 'Larsen effect'). This gives better speech intelligibility by allowing the speaker volume to be turned up as loud as required without any risk of feedback. Discussion Control Without Operator The CU can be setup to operate standalone without the need for an operator. The following 5 modes can be chosen using a rotary control on the unit's top panel: • Open mode - allows selection of one to four microphones (excluded chairmen microphones) which can be simultaneously active • Open mode with auto-switch-off - allows selection of one to four microphones (excluded chairmen microphones) which can be simultaneously active. If the delegate does not speak for 30 seconds, microphones are automatically switched off • Override mode - delegates can override each other simply by activating their microphones. Only one microphone can be active at any one time. (Note: In override mode, delegates cannot override chairmen) • Chairman only mode - only chairmen can speak. Delegate microphones cannot be activated, even when a chairman is not speaking • Test mode - checks if system connections are correct. All microphone light rings and contribution unit LEDs light up to indicate that units are properly connected Supplies Power for up to 50 Contribution Units The CU has two trunk outputs for the loop-through connection of contribution units. It is possible to connect 25 contribution units to each trunk output, with a maximum system cable length of 109.3 yards (100m). Provides Control for up to 150 Contribution Units Up to 3 CUs can be used together in a discussion system to power and control a maximum of 150 contribution units. In this configuration a single CU acts as a master controller for the entire system. Built-in Monitor Loudspeaker The built-in monitor loudspeaker and headphone socket allow the conference to be monitored. Interfaces the System With External Equipment The following equipment can be interfaced to the CCS Ultro Discussion System through the CU: • External wired or wireless microphone - for guest speakers or audience participation. (Note: The external microphone is muted when the priority button on a chairman unit is pressed, and when the system is operating in 'chairman only' mode) • External PA system - for transmitting the proceedings to an audience in the same room or an adjacent room• Tape recorder - for external recording and playing back meetings and discussions • Audio equipment - for providing background music • Telephone coupler - to allow a remote delegate to participate via telephone• External audio processing - an insertion connector is provided Controls and Indicators (Top) • Mains on/off switch • Graphical display for status information (CCS‐CURD) • 5 soft buttons for configuration and control of thebuilt-in MP3 recorder (CCS‐CURD) • Loudspeaker volume control, for setting output level of loudspeakers of contribution units. This control also determines the maximum level for the headphone outputs of the contribution units and the CU. • Microphone mode rotary switch, for setting the number of simultaneously active microphones, and selecting one of the four operation modes (plus test mode) • Power on LED Controls and Indicators (Back) • On/off switch for digital acoustic feedback suppression facility (CCS‐CUD, CCS‐CURD)• Microphone input gain adjustment • External recorder input gain adjustment• Insertion connector bypass switch   Specifications: Connections Top • 1x 0.14" (3.5mm) stereo headphone socket Back • 1x AC input • 2x 7-pole circular female connectors, trunk in/out loop through interconnection  • 1x 3-pole female XLR connector, microphone input (can be used as line input by included 50dB attenuator) • 1 x Cinch connector pair, line input/output  • 1 x Cinch connector pair, telephone input/output • 1 x Cinch connector pair, insertion input/output  • 2 x Cinch connector pairs (R/L channel), external recorder input/output • USB interface (CCS-CURD) Power Supply Mains voltage: 100 to 240 VAC ± 10% Current consumption: maximum 0.9A (100 VAC) to 0.3 A (240 VAC) DC supply to contribution units: 24V ± 1V (current limited) Volume mute (50dB att.) + 10 steps of 1.9dB Limiter 10dB above nominal level loudspeaker / headphone Gain Gain reduction due to number of open microphones (NOM): ÷ NOM ± 1 dB Total Harmonic Distortion Nominal input (85 dB SPL): Max. input (110 dB SPL): Sample Rate Recording: 32kHz Playback: 32, 44.1, 48kHz Bit Rate Recording: 64, 96, 128, 192, 256 KBit/sec Playback: any bitrate Mount Tabletop (portable or fixed) 19-inch rack flush mounting Material Top: polymer Bottom: painted metal Color Charcoal and Black Dimensions (HxWxD) 3.4 x 14.2 x 5.6" (84 x 361 x 143mm) Height of feet: 0.22" (5.5mm) Weight 3.3 lb (1.5kg)

Description: Details iShopping.pk brings you the best price for Bosch CCS-CU Control Unit For CCS 900 Ultro Conference System U.S. Version with express shipping all over Pakistan.   The Bosch CCS-CU Control Unit is the central power and control station for all CCS 900 Ultro Conference System contributor units, such as the chairman and delegate units. The control unit will supply power for up to 50 delegate / chairman units, and provide control for up to 150. The unit features a built in speaker and automated, programmable control over contributor units without the need for an operator. Its Digital Acoustic Feedback Suppression (DAFS) eliminates feedback howling and maintains clear, intelligible speech. Plenty of connections allow for interfacing within paging systems, amplifier systems, recording devices and more. The unit is feature rich, however its control section is straightforward and intuitive to operate in any conference setting.   Features: Discussion Control Without Operator The CU can be setup to operate standalone without the need for an operator. The following 5 modes can be chosen using a rotary control on the unit's top panel: • Open mode - allows selection of one to four microphones (excluded chairmen microphones) which can be simultaneously active • Open mode with auto-switch-off - allows selection of one to four microphones (excluded chairmen microphones) which can be simultaneously active. If the delegate does not speak for 30 seconds, microphones are automatically switched off • Override mode - delegates can override each other simply by activating their microphones. Only one microphone can be active at any one time. (Note: In override mode, delegates cannot override chairmen) • Chairman only mode - only chairmen can speak. Delegate microphones cannot be activated, even when a chairman is not speaking • Test mode - checks if system connections are correct. All microphone light rings and contribution unit LEDs light up to indicate that units are properly connected Supplies Power for up to 50 Contribution Units The CU has two trunk outputs for the loop-through connection of contribution units. It is possible to connect 25 contribution units to each trunk output, with a maximum system cable length of 109.3 yards (100m). Provides Control for up to 150 Contribution Units Up to 3 CUs can be used together in a discussion system to power and control a maximum of 150 contribution units. In this configuration a single CU acts as a master controller for the entire system. Built-in Monitor Loudspeaker The built-in monitor loudspeaker and headphone socket allow the conference to be monitored. Interfaces the System With External Equipment The following equipment can be interfaced to the CCS Ultro Discussion System through the CU: • External wired or wireless microphone - for guest speakers or audience participation. (Note: The external microphone is muted when the priority button on a chairman unit is pressed, and when the system is operating in 'chairman only' mode) • External PA system - for transmitting the proceedings to an audience in the same room or an adjacent room • Tape recorder - for external recording and playing back meetings and discussions • Audio equipment - for providing background music • Telephone coupler - to allow a remote delegate to participate via telephone• External audio processing - an insertion connector is provided Controls and Indicators (Top) • Mains on/off switch • Graphical display for status information (CCS‐CURD) • 5 soft buttons for configuration and control of thebuilt-in MP3 recorder (CCS‐CURD) • Loudspeaker volume control, for setting output level of loudspeakers of contribution units. This control also determines the maximum level for the headphone outputs of the contribution units and the CU. • Microphone mode rotary switch, for setting the number of simultaneously active microphones, and selecting one of the four operation modes (plus test mode) • Power on LED Controls and Indicators (Back) • On/off switch for digital acoustic feedback suppression facility (CCS‐CUD, CCS‐CURD)• Microphone input gain adjustment • External recorder input gain adjustment • Insertion connector bypass switch   Specifications: Connections Top • 1x 0.14" (3.5mm) stereo headphone socket Back • 1x AC input • 2x 7-pole circular female connectors, trunk in/out loop through interconnection  • 1x 3-pole female XLR connector, microphone input (can be used as line input by included 50dB attenuator) • 1 x Cinch connector pair, line input/output  • 1 x Cinch connector pair, telephone input/output • 1 x Cinch connector pair, insertion input/output  • 2 x Cinch connector pairs (R/L channel), external recorder input/output • USB interface (CCS-CURD) Power Supply Mains voltage: 100 to 240 VAC ± 10% Current consumption: maximum 0.9A (100 VAC) to 0.3 A (240 VAC) DC supply to contribution units: 24V ± 1V (current limited) Volume mute (50dB att.) + 10 steps of 1.9dB Limiter 10dB above nominal level loudspeaker / headphone Gain Gain reduction due to number of open microphones (NOM): ÷ NOM ± 1 dB Total Harmonic Distortion Nominal input (85 dB SPL): Max. input (110 dB SPL): Sample Rate Recording: 32kHz Playback: 32, 44.1, 48kHz Bit Rate Recording: 64, 96, 128, 192, 256 KBit/sec Playback: any bitrate Mount Tabletop (portable or fixed) 19-inch rack flush mounting Material Top: polymer Bottom: painted metal Color Charcoal and Black Dimensions (HxWxD) 3.4 x 14.2 x 5.6" (84 x 361 x 143mm) Height of feet: 0.22" (5.5mm) Weight 3.3 lb (1.5kg)

Description: Details iShopping.pk brings you the best price for Bosch CCS-CUD Control Unit For CCS 900 Ultro Conference System U.S. Version with express shipping all over Pakistan.   The Bosch CCS-CUD Control Unit is the central power and control station for all CCS 900 Ultro Conference System contributor units, such as the chairman and delegate units. The control unit will supply power for up to 50 delegate / chairman units, and provide control for up to 150. The unit features a built in speaker and automated, programmable control over contributor units without the need for an operator. Its Digital Acoustic Feedback Suppression (DAFS) eliminates feedback howling and maintains clear, intelligible speech. Plenty of connections allow for interfacing within paging systems, amplifier systems, recording devices and more. The unit is feature rich, however its control section is straightforward and intuitive to operate in any conference setting.   Features: Digital Acoustic Feedback Suppression The digital acoustic feedback suppression facility automatically eliminates acoustic feedback (also known as 'howling' or 'Larsen effect'). This gives better speech intelligibility by allowing the speaker volume to be turned up as loud as required without any risk of feedback. Discussion Control Without Operator The CU can be setup to operate standalone without the need for an operator. The following 5 modes can be chosen using a rotary control on the unit's top panel: • Open mode - allows selection of one to four microphones (excluded chairmen microphones) which can be simultaneously active • Open mode with auto-switch-off - allows selection of one to four microphones (excluded chairmen microphones) which can be simultaneously active. If the delegate does not speak for 30 seconds, microphones are automatically switched off • Override mode - delegates can override each other simply by activating their microphones. Only one microphone can be active at any one time. (Note: In override mode, delegates cannot override chairmen) • Chairman only mode - only chairmen can speak. Delegate microphones cannot be activated, even when a chairman is not speaking • Test mode - checks if system connections are correct. All microphone light rings and contribution unit LEDs light up to indicate that units are properly connected Supplies Power for up to 50 Contribution Units The CU has two trunk outputs for the loop-through connection of contribution units. It is possible to connect 25 contribution units to each trunk output, with a maximum system cable length of 109.3 yards (100m). Provides Control for up to 150 Contribution Units Up to 3 CUs can be used together in a discussion system to power and control a maximum of 150 contribution units. In this configuration a single CU acts as a master controller for the entire system. Built-in Monitor Loudspeaker The built-in monitor loudspeaker and headphone socket allow the conference to be monitored. Interfaces the System With External Equipment The following equipment can be interfaced to the CCS Ultro Discussion System through the CU: • External wired or wireless microphone - for guest speakers or audience participation. (Note: The external microphone is muted when the priority button on a chairman unit is pressed, and when the system is operating in 'chairman only' mode) • External PA system - for transmitting the proceedings to an audience in the same room or an adjacent room • Tape recorder - for external recording and playing back meetings and discussions • Audio equipment - for providing background music • Telephone coupler - to allow a remote delegate to participate via telephone• External audio processing - an insertion connector is provided Controls and Indicators (Top) • Mains on/off switch • Graphical display for status information (CCS‐CURD) • 5 soft buttons for configuration and control of thebuilt-in MP3 recorder (CCS‐CURD) • Loudspeaker volume control, for setting output level of loudspeakers of contribution units. This control also determines the maximum level for the headphone outputs of the contribution units and the CU. • Microphone mode rotary switch, for setting the number of simultaneously active microphones, and selecting one of the four operation modes (plus test mode) • Power on LED Controls and Indicators (Back) • On/off switch for digital acoustic feedback suppression facility (CCS‐CUD, CCS‐CURD)• Microphone input gain adjustment • External recorder input gain adjustment • Insertion connector bypass switch   Specifications: Connections Top • 1x 0.14" (3.5mm) stereo headphone socket Back • 1x AC input • 2x 7-pole circular female connectors, trunk in/out loop through interconnection  • 1x 3-pole female XLR connector, microphone input (can be used as line input by included 50dB attenuator) • 1 x Cinch connector pair, line input/output  • 1 x Cinch connector pair, telephone input/output • 1 x Cinch connector pair, insertion input/output  • 2 x Cinch connector pairs (R/L channel), external recorder input/output • USB interface (CCS-CURD) Power Supply Mains voltage: 100 to 240 VAC ± 10% Current consumption: maximum 0.9A (100 VAC) to 0.3 A (240 VAC) DC supply to contribution units: 24V ± 1V (current limited) Volume mute (50dB att.) + 10 steps of 1.9dB Limiter 10dB above nominal level loudspeaker / headphone Gain Gain reduction due to number of open microphones (NOM): ÷ NOM ± 1 dB Total Harmonic Distortion Nominal input (85 dB SPL): Max. input (110 dB SPL): Sample Rate Recording: 32kHz Playback: 32, 44.1, 48kHz Bit Rate Recording: 64, 96, 128, 192, 256 KBit/sec Playback: any bitrate Mount Tabletop (portable or fixed) 19-inch rack flush mounting Material Top: polymer Bottom: painted metal Color Charcoal and Black Dimensions (HxWxD) 3.4 x 14.2 x 5.6" (84 x 361 x 143mm) Height of feet: 0.22" (5.5mm) Weight 3.3 lb (1.5kg)

Description: Details iShopping.pk brings you the best price for ClearOne 360° Delta Microphone with express shipping all over Pakistan.   The Delta Mic's sleek design accentuates tele conferencing applications that demand high-performance audio quality. Its compact size makes it ideal for conference tables requiring minimum-visibility mics with 360-degree pickup.   Features: • Phantom power required •  Open Circuit Sensitivity: 5.6mV (-45dB re 1V/1 Pa) •  Maximum Input Sound Level: 130dB, 1kHz at 1% THD •  Signal/Noise Ratio: 65dB at 1kHz/1 Pa   Specifications: Technical Information Connectivity Technology Wired Cable Length 25 ft Minimum Frequency Response 30 Hz Maximum Frequency Response 20 kHz Microphone Microphone Technology Dynamic                                            Microphone Type Desktop Microphone Sensitivity -38 dB Interfaces/Ports Host Interface XLR Physical Characteristics Height 1.1" Diameter 8.8"

Description: Details iShopping.pk brings you the best price for HyperX CloudX Stinger Core Xbox Gaming Headset (HSCSCX-BK) with express shipping all over Pakistan.   Specifications:   Driver Dynamic, 40mm with neodymium magnets Type Circumaural, Closed back Frequency response 20Hz–20,000Hz Impedance 16 Ω Sound pressure level 99dBSPL/mW at 1kHz T.H.D. Cable length and type Headset (1.3m) Connection Headset - 3.5mm plug (4 pole) Element Electret condenser microphone Polar pattern Noise-cancelling Frequency response 50Hz-18,000 Hz Sensitivity -41.5dBV (0dB=1V/Pa,1kHz)   Official Xbox licensed headset CloudX Stinger Core was tested and approved by Microsoft, and connects directly to Xbox One and Xbox Series X|S controllers with a 3.5mm port.   Optimized for convenient comfort Soft ear cushions provide a comfortable fit, and the flexible mic can be positioned just as you like.   Immersive in-game audio CloudX Stinger Core’s 40mm directional drivers are tuned to provide enhanced bass and are optimized for console gaming.