12v 10a

Temperature control mode: ON / OFF Temperature range:-50-110 ResolutionWhen temperature is 0.1 the resolution is -9.9~99.9, other temperature segment is 1 Control accuracy: 0.1 Hysteresis accuracy: 0.1 Refresh rate: 0.5S High temperature protection 0-110 Supply voltage: for DC 12V Static current: ≤ 35MA, attract current ≤ 65MA Output voltage: for DC 12V Output power: 10A relay Measurement input: NTC (10K 0.5%) Waterproof Sensor Environmental requirements: -10 ~ 60 Humidity 20% -85%

Size: approx.50x16x1mm Maximum discharge current: 10A Overcharge detection voltage: 4.25-4.35V±0.05V Over-discharge detection voltage: 2.3-3.0V±0.05V Maximum working current: 5A-8A Transient current: 9A-10A Operating temperature: -40~50? Storage temperature: -40~80? Quiescent current: <6uA Internal resistance: <60mO Service life: >30,000 hours

The range of w1209 digital temperature controller is -50 to 110C. Resolution of temperature module at -9.9 to 99.9 is 0.1C The resolution of the module at all other temperatures is 1C. The accuracy of the measurement of the W1209 Temperature Control Switch is 0.1 C. Its control accuracy is 0.1C. The module refresh rate is 0.5 Sec. The power controlling module input power is 12V. NTC is its measuring inputs. Its output consists of 1 channel relay and its capacity is 10A.

For 5V 12V 24V 48V DC circuits 12V 10A 6A 250V AC Best quality pure copper switch ON-OFF switch size 15 x 10.5 mm

Module Properties: non-isolated step-up module (BOOST) 65 * 36.5 * 23 (length * width * high) (mm) Input voltage:10-32V Output voltage: 12-35V (adjustable) Output Current: 5A (MAX) Input Current: 10A (MAX) (Please enhance heat dissipation if more than 10A) Output power: natural cooling 100W (MAX), enhance heat dissipation 150W (MAX) Easy to drive 65W 90W dual-core notebook. Use a 12V battery drive 19V 3.42A notebook, the module temperature about 45c Conversion efficiency: 94% (measured at Input 16V, output 19V 2.5A) Output Ripple: 2% (MAX) 20M-bandwidth Operating Temperature: Industrial (-40c to +85c) (ambient temperature exceeds 40c, lower power use, or to enhance heat dissipation) Full load temperature rise: 45c No-load current: 25mA typical Voltage regulation: 0.5% Dynamic response speed: 5% 200uS Short circuit protection: None (Please Install fuses and protection circuits at Input port.) Input Reverse Polarity Protection: None (Please Series diode at the input port.)Some Applications: 1. DIY an output adjustable vehicle power supply, connect the 12V input, and output could be 14-35V(adjustable freely), However, the output voltage can not be less than the input voltage. 2. Car laptop power supply: connected to 12V power supply, output voltage regulation as your notebook need.

W1209 Temprature controller with casing Temperature control mode: ON / OFF Temperature range:-50-110 ResolutionWhen temperature is 0.1 the resolution is -9.9~99.9, other temperature segment is 1 Control accuracy: 0.1 Hysteresis accuracy: 0.1 Refresh rate: 0.5S High temperature protection 0-110 Supply voltage: for DC 12V Static current: ≤ 35MA, attract current ≤ 65MA Output voltage: for DC 12V Output power: 10A relay Measurement input: NTC (10K 0.5%) Waterproof Sensor Environmental requirements: -10 ~ 60 Humidity 20% -85% Digital Led Thermostat Temperature Control DC 12V Adapter Thermometer Thermo Controller Switch Module + NTC Sensor W1209

Axotic Smart Wifi Mobile Controlled Power Extension - 3 AC Outlets Wi-Fi Smart Power Strip - Ldnio SCW3451 Power2500W 10A 250V~Input100-250V 50/60Hz 10A(Max)PD Output5V3A, 9V3A,12V2.5A,15V2A,20V1.5A 30W (Max)QC Output5V 3A, 9V 2A,12V 1.5A 18W(Max)Socket Type EU (2Pin Round) SocketTotal Power30W MaxPower cord2M

Color: White Material: ABS Power Supply Voltage: 12V, 24V, 220V (variable parameter) Temperature Measurement Range: -50 - 110 ° C Temperature Control Range: -50 - 110 ° C Control Accuracy: 0.1 ° C Display Accuracy: 0.1 ° C Measurement Input: NTC10K Waterproof Probe L = 1 m Output Type: Relay Output (output switch) Output current: 10A Net Weight: 57g Product Size: 5.5 x 3.8 x 3.2cm

Temperature range:-50-110 ° Dimensions: 48* 40mm Temperature control mode: ON / OFF Resolution:When temperature is 0.1°, the resolution is -9.9~99.9, other temperature segment is 1° Control accuracy: 0.1 ° Hysteresis accuracy: 0.1° Refresh rate: 0.5S High temperature protection: 0-110° Supply voltage: DC 12V Static current: ≤ 35MA, attract current ≤ 65MA Output power: 10A relay Measurement input: NTC (10K 0.5%) Waterproof Sensor Environmental requirements: -10 ~ 60 °,Humidity 20% -85%