10kw grid inverter

Main Features 10KW three phase on-grid inverter with energy storage Self-consumption and Feed-in to the grid Programmable supply priority for PV, Battery or Grid User-adjustable charging current up to 200A Programmable multiple operations modes: Grid tie, Off grid, and grid-tie with backup Built-in Timer for various mode of on/off operation Multiple communication for USB, RS-232, Modbus and SNMP Monitoring software for real time status display and control

OMEGA POWER Infini Solar is a hybrid inverter which combines solar system, AC utility, and battery power source to supply continuous power. It is suitable for the remote areas where the cost of utility is too high or emergency usage when utility is not stable. Main Features 3KW on-grid inverter with energy storage Pure sine wave output Microprocessor controlled to guarantee stable charging system Multiple operations: Grid tie, Off grid, and grid-tie with backup Built-in MPPT solar charger LCD display panel for comprehensive information Multiple communication Green substitution for generators User-adjustable battery charging current

SOLAR POWERED HOME SYSTEM KIT. Hybrid Off-Grid Inverter system is a set of battery charging and discharging control , PV mains switch control and inverter control in one multi-functional integrated system, mainly including PV array, grid, battery, hybrid off-grid inverter and the AC load, PV array absorption of solar radiation and translate into electrical energy to provide power for the entire system, utility power switchover and Inverting control function, also could converting DC power from battery to supply power for AC loads. System Priority mode is PV mode. PV controller and Grid charger achieves the intelligent battery-charging control. The inverter inverts the DC to AC for the load power supplying ;and automatic control the start-stop of Grid charger if needed.Try the best to use the solar energy and the continuous demand of electricity. It�s the preferred solution to solve the public grid or less developed areas residents daily e lectricity. System Includes: Hybrid Inverter including PV Charger,Grid Charger, Inverter and Controller, using a common DC Bus mode, as the output of Battery, PV Charger, Grid Charger and Inverter merge into DC Bus. Meanwhile, DC Bus is battery�s charging current path, and PV charging is priority than Grid charging.

Infini 3 Kilowatt inverter 48 Volt battery system with 60 Ampere and 90 Ampere Built in MPPT Solar battery charger PV input range 250 VDC to 450 VDC Maximizes battery life span by syncing grid power when PV output is not enough to run the load. with 3 operation modes (On-Grid, On-Grid with backup and Off Grid) On Screen Active status display 1 Year warranty

Infini Solar is a hybrid invert er which combines solar system, AC utility, and battery power source to supply continuous power. It is suitable for the remote areas where the cost of utility is too high or emergency usage when utility is not stable. Main Features 3KW on-grid inverter with energy storage Pure sine wave output Microprocessor controlled to guarantee stable charging system Multiple operations: Grid tie, Off grid, and grid-tie with backup Built-in MPPT solar charger LCD display panel for comprehensive information Multiple communication Green substitution for generators User-adjustable battery charging current

world's Most Reliable Schneider Inverter Model: XW6048 (6Kilowatt , 48 Volt) XW4548 (4.5Kilowatt , 48 Volt) Additional Accessories: Gen Auto Start, Solar Control Panel, Conext Com web interface box 100 Ampere built-in AC to DC charger. Grid Selling feature, Load sharing Charge Block Start/Stop feature. Sine wave inverter with 3 years local and 5 year international warranty. Optional warranty available up to 10 years. Service life up to 15 ~ 20 year

we deal in solar inverter and they are available at best price in pakistan and in best quality we have two types solar inverter Offgrid hybrid Voltronic Axpert sizes 1,3,5 kva On grid Voltronic infini 3,5,10 kw East power 3kw

Main Features 12000 to 14000 watts Pv support 10KW three phase on-grid inverter with energy storage Self-consumption and Feed-in to the grid Programmable supply priority for PV, Battery or Grid User-adjustable charging current up to 200A Programmable multiple operations modes: Grid tie, Off grid, and grid-tie with backup Built-in Timer for various mode of on/off operation Multiple communication for USB, RS-232, Modbus and SNMP Monitoring software for real time status display and control

10,000 watts of pure sine wave Grid Tie/injected System highly efficient and Reliable German SMA Technology Inverter no batteries required IP65 certified can install in any environment also water proof Design. SMA German Inverter 10 KW pure sine wave power factor 0.85 Extra Efficient Phase synchronization And High quality A grade Solar Panels Pure Copper quality DC wire without battery system online monitoring Daily Hourly Data logging history IP65 certified Inverter weather proof design.

World's top 10 solar panels Trina Solar Yingli Green ReneSola Sharp Japan Jinko solar LG available in 245, 250, 260, 275, and 300 watt sizes Inverter Schneider 4.5 KW 6.0 KW Hybrid Inveter Axpert KS 5KVA Axpert MKS 5KVA Infini 3KW, 3KW Plus Infini 10KW 3phase MPPT Charge Controller Morning Star-USA 12/24/36/48V - 60A Morning Star-USA 12/24/36/48V - 45A Xantrex-Canada 12/24/36/48V - 60A MidNite-USA 12/24/36/48V-60A MidNite-USA 12/24/36/48V-80A MidNite-USA 12/24/36/48V-96A AGM/GEL / Polymer GEL Battery Narada 12V - 100 Ah Narada 12V - 150 Ah Narada 12V - 155 Ah Narada 12V - 200 Ah SacredSun 12V - 100Ah SacredSun 12V - 150Ah SacredSun 12V - 200Ah SacredSun 12V - 245Ah Coslight 2V - 300Ah Coslight 2V - 500Ah Coslight 2V - 600Ah available at best price

Main Features Voltronics Infini 3KW PLUS 60A 3KW on-grid inverter with energy storage Pure sine wave output Microprocessor controlled to guarantee stable charging system Multiple operations: Grid tie, Off grid, and grid-tie with backup Built-in MPPT solar charger LCD display panel for comprehensive information Multiple communication Green substitution for generators User-adjustable battery charging current

Electric vehicles aren't just an efficient way to move people and products—they are literally powering the transition to a clean energy economy by taking on one of the largest contributors to greenhouse gas emissions—transportation. In this online course, you will get a comprehensive overview of hybrid and electric vehicle systems, battery technologies, the charging infrastructure, and grid integration and be able to apply what you’ve learned toward a career in this exciting new field. Explain the role of electric vehicles in the clean-energy transition Evaluate the challenges of integrating electrified vehicles into the electric grid Ascertain the advantages and disadvantages between hybrid electric vehicle (HEV), plug-in hybrid electric vehicle (PHEV), and battery electric vehicle (BEV) systems Comprehend role and design of battery management systems (BMS) and applications Understand battery technologies including lithium-ion batteries, cell balancing, battery capacity, and aging factors Evaluate the basics of charging technologies, and future solutions such as fast charging strategies, wireless charging, and battery swapping. Contents: .Fundamentals of hybrid and electric vehicles. How an electric vehicle works. The fuel cell vehicle. Charging modes and connector types. Comparison between thermal and electric vehicles .Hybrid and electric vehicle technology. Electronics and components. Battery types. Types of motors. 48V Mild Hybrid technologies. HV and EV components: batteries. Explanation of the Tesla Model S battery module. Disassembly and analysis of the Renault Zoe battery. Replacement of Hyundai Ioniq PHEV battery modules. Tesla Model S electrical system disassembly and analysis. Nissan eNV-200 analysis. Fuel cell technologies (Hyundai Nexo). Flooding of an electric vehicle .Chargers and charging methods in hybrid and electric vehicles. Charging methods and connector types. CESVIMAP charger test area. Parts of a charger. CESVIMAP study on electric vehicle chargers. Nissan Leaf charging experience. Particularities of the cooling and air conditioning system in electric and hybrid vehicles. Thermal/electric engine cooling systems. Cooling systems for the electrical system (inverter/charger). Cabin air conditioning system. Explanation of a scroll compressor. Battery cooling and heating systems Particularities in the workshop when working with air conditioning systems. Intervention on hybrid and electric vehicles. Legislation, procedures and tools. Electrical risks and legislation. Procedure for de-energising hybrid and electric vehicles. Protection equipment. Maintenance of hybrid and electric vehicles. Models to be studied: Hyundai Ioniq Hybrid, Mitsubishi Outlander and Tesla Model 3. This course is designed to introduce and orientate the student to hybrid and electric vehicles. This will be achieved through a series of modules that will be taught in the green energy lab and will include the following: an introduction to types of hybrid and electric vehicles - hybrid safety - maintenance and operation of hybrid vehicles; oil changes/coolant system service, H.V. disconnects, hybrid A/C service procedures and electric power steering. This course will enhance the skill level and general knowledge of the student about hybrid and electric vehicles within their workplace environment. http://www.icollegete.com/ International College of Technical Education. Main office: Office No. 27, Second Floor, Maryam Shadi Hall Plaza (Airies Plaza), Shamsabad, Murree Road, Rawalpindi, Pakistan 46,000. Email: info@icollegete.com Contact: 051-6122937, 0311-5193625, 0092-335-4176949 http://www.icollegete.com/course/hybrid-car-technology-course-in-rawalpindi-pakistan/

Electric vehicles are not just an efficient way to move people and products – they literally support the transition to a clean energy economy by taking over one of the biggest contributors to greenhouse gas emissions – transportation. In this online course, you'll gain a comprehensive overview of hybrid and electric vehicle systems, battery technologies, charging infrastructure and grid integration, and apply what you've learned to a career in this exciting new field. Explain the role of electric vehicles in the clean energy transition Evaluate the challenges of integrating electrified vehicles into the electrical grid Learn the pros and cons between hybrid electric vehicle (HEV), plug-in hybrid electric vehicle (PHEV), and battery electric vehicle (BEV) systems Understand the role and design of Battery Management Systems (BMS) and applications Understand battery technologies including lithium-ion batteries, cell balancing, battery capacity and aging factors Review the fundamentals of charging technologies and future solutions such as fast charging strategies, wireless charging and battery swapping. Content: .Fundamentals of hybrid and electric vehicles. How an electric vehicle works. Fuel cell vehicle. Charging modes and connector types. Comparison of thermal and electric vehicles Hybrid and electric vehicle technology. Electronics and components. Battery types. Engine types. 48V Mild Hybrid technology. HV and EV components: batteries. Explanation of the Tesla Model S battery module. Renault Zoe battery disassembly and analysis. Replacement of Hyundai Ioniq PHEV battery modules. Tesla Model S electrical system disassembly and analysis. Nissan eNV-200 analysis. Fuel cell technology (Hyundai Nexo). Electric vehicle flood .Chargers and charging methods in hybrid and electric vehicles. Charging methods and connector types. CESVIMAP charger test area. Charger parts. CESVIMAP study on electric vehicle chargers. Nissan Leaf charging experience. Peculiarities of the cooling and air conditioning system in electric and hybrid vehicles.Thermal/electrical engine cooling systems. Cooling systems for electrical system (inverter/charger). Cabin air conditioning system. Scroll compressor explained. Battery-powered cooling and heating systems Peculiarities in the workshop when working with air conditioning systems. Impact on hybrid and electric vehicles. Legislation, procedures and tools. Electrical hazards and legislation. Procedure for switching off hybrid and electric vehicles. Protective equipment. Maintenance of hybrid and electric vehicles. Models to study: Hyundai Ioniq Hybrid, Mitsubishi Outlander and Tesla Model 3. This course is designed to introduce and orient students to the field of hybrid and electric vehicles. This will be achieved through a series of modules which will be taught in the Green Energy Lab and will include the following: introduction to hybrid and electric vehicle types hybrid safety - maintenance and operation of hybrid vehicles; oil changes/cooling system service, H.V. disconnection, hybrid air conditioning and electric power steering service procedures. This course will expand the student's skill level and general knowledge of hybrid and electric vehicles in their workplace. http://www.icollegete.com/ International College of Technical Education. Main office: Office No. 27, Second Floor, Maryam Shadi Hall Plaza (Airies Plaza), Shamsabad, Murree Road, Rawalpindi, Pakistan 46,000. Email: info@icollegete.com Contact: 051-6122937, 0311-5193625, 0092-335-4176949 http://www.icollegete.com/course/hybrid-car-technology-course-in-rawalpindi-pakistan/

Electric vehicles are not just an efficient way to move people and products – they literally support the transition to a clean energy economy by taking over one of the biggest contributors to greenhouse gas emissions – transportation. In this online course, you'll gain a comprehensive overview of hybrid and electric vehicle systems, battery technologies, charging infrastructure and grid integration, and apply what you've learned to a career in this exciting new field. Explain the role of electric vehicles in the clean energy transition Evaluate the challenges of integrating electrified vehicles into the electrical grid Learn the pros and cons between hybrid electric vehicle (HEV), plug-in hybrid electric vehicle (PHEV), and battery electric vehicle (BEV) systems Understand the role and design of Battery Management Systems (BMS) and applications Understand battery technologies including lithium-ion batteries, cell balancing, battery capacity and aging factors Review the fundamentals of charging technologies and future solutions such as fast charging strategies, wireless charging and battery swapping. Content: .Fundamentals of hybrid and electric vehicles. How an electric vehicle works. Fuel cell vehicle. Charging modes and connector types. Comparison of thermal and electric vehicles Hybrid and electric vehicle technology. Electronics and components. Battery types. Engine types. 48V Mild Hybrid technology. HV and EV components: batteries. Explanation of the Tesla Model S battery module. Renault Zoe battery disassembly and analysis. Replacement of Hyundai Ioniq PHEV battery modules. Tesla Model S electrical system disassembly and analysis. Nissan eNV-200 analysis. Fuel cell technology (Hyundai Nexo). Electric vehicle flood .Chargers and charging methods in hybrid and electric vehicles. Charging methods and connector types. CESVIMAP charger test area. Charger parts. CESVIMAP study on electric vehicle chargers. Nissan Leaf charging experience. Peculiarities of the cooling and air conditioning system in electric and hybrid vehicles. Thermal/electrical engine cooling systems. Cooling systems for electrical system (inverter/charger). Cabin air conditioning system. Scroll compressor explained. Battery-powered cooling and heating systems Peculiarities in the workshop when working with air conditioning systems. Impact on hybrid and electric vehicles. Legislation, procedures and tools. Electrical hazards and legislation. Procedure for switching off hybrid and electric vehicles. Protective equipment. Maintenance of hybrid and electric vehicles. Models to study: Hyundai Ioniq Hybrid, Mitsubishi Outlander and Tesla Model 3. This course is designed to introduce and orient students to the field of hybrid and electric vehicles. This will be achieved through a series of modules which will be taught in the Green Energy Lab and will include the following: introduction to hybrid and electric vehicle types - hybrid safety - maintenance and operation of hybrid vehicles; oil changes/cooling system service, H.V. disconnection, hybrid air conditioning and electric power steering service procedures. This course will expand the student's skill level and general knowledge of hybrid and electric vehicles in their workplace. http://www.icollegete.com/ International College of Technical Education. Main office: Office No. 27, Second Floor, Maryam Shadi Hall Plaza (Airies Plaza), Shamsabad, Murree Road, Rawalpindi, Pakistan 46,000. Email: info@icollegete.com Contact: 051-6122937, 0311-5193625, 0092-335-4176949 http://www.icollegete.com/course/hybrid-car-technology-course-in-rawalpindi-pakistan/

Electric cars are not just an efficient way to transport people and products – they literally support the transition to a clean energy economy by taking over one of the biggest contributors to greenhouse gas emissions – transportation. In this online course, you'll gain a comprehensive overview of hybrid and electric vehicle systems, battery technologies, charging infrastructure and grid integration, and apply what you've learned to a career in this exciting new field. Explain the role of electric vehicles in the clean energy transition Evaluate the challenges of integrating electrified vehicles into the electrical grid Learn about the pros and cons between hybrid electric vehicle (HEV), plug-in hybrid electric vehicle (PHEV), and battery electric vehicle (BEV) systems Understand the role and design of battery management systems (BMS) and applications Understand battery technologies including lithium-ion batteries, cell balancing, battery capacity and aging factors Review the basics of charging technologies and future solutions such as fast charging strategies, wireless charging and battery swapping. Content: Fundamentals of hybrid and electric vehicles. How an electric vehicle works. Fuel cell vehicle. Charging modes and connector types. Comparison of thermal and electric vehicles Hybrid and electric vehicle technology. Electronics and components. Battery types. Engine types. 48V Mild Hybrid technology. HV and EV components: batteries. Tesla Model S battery module explained. Renault Zoe battery disassembly and analysis. Replacement of Hyundai Ioniq PHEV battery modules. Tesla Model S electrical system disassembly and analysis. Nissan eNV-200 analysis. Fuel cell technology (Hyundai Nexo). A flood of electric vehicles .Chargers and charging methods in hybrid and electric vehicles. Charging methods and connector types. CESVIMAP charger test area. Charger parts. CESVIMAP study on electric vehicle chargers. Nissan Leaf charging experience. Peculiarities of the cooling and air conditioning system in electric and hybrid vehicles. Thermal/electrical engine cooling systems. Cooling systems for electrical system (inverter/charger). Cabin air conditioning system. Scroll compressor explained. Battery-powered cooling and heating systems Peculiarities in the workshop when working with air conditioning systems. Impact on hybrid and electric vehicles. Legislation, procedures and tools. Electrical hazards and legislation. Procedure for switching off hybrid and electric vehicles. Protective equipment. Maintenance of hybrid and electric vehicles. Models to study: Hyundai Ioniq Hybrid, Mitsubishi Outlander and Tesla Model 3. The aim of the course is to introduce students to and orientate themselves in the field of hybrid and electric vehicles. This will be achieved through a series of modules which will be taught in the Green Energy Lab and will include the following: introduction to hybrid and electric vehicles - hybrid safety - maintenance and operation of hybrid vehicles; oil changes/cooling system service, H.V. disconnection service procedures, hybrid air conditioning and electric power steering. This course will expand students' skill level and general knowledge of hybrid and electric vehicles in their workplace. http://www.icollegete.com/ International College of Technical Education. Main office: Office No. 27, Second Floor, Maryam Shadi Hall Plaza (Airies Plaza), Shamsabad, Murree Road, Rawalpindi, Pakistan 46,000. Email: info@icollegete.com Contact: 051-6122937, 0311-5193625, 0092-335-4176949 http://www.icollegete.com/course/hybrid-car-technology-course-in-rawalpindi-pakistan/